Isuzu N Series 2008, Owner'S Manual

Page: 225 / 580

4-97
CONTROLS AND INSTRUMENTS
CAUTION
The AMT emergency switch must be used only in an emergency. Normally, •
the switch must be kept in the "OFF" position. Do not open the cover of the
emergency switch. Never operate the AMT emergency switch while driving.
After you have moved the vehicle to a safe place using the emergency switch,
•
promptly place the emergency switch back to the "OFF" position, return the
gearshift lever to "N", and close the cover.
When the AMT emergency switch is in the "ON" position, the AMT warning light
•
flashes.
When the emergency switch is in the "ON" position with the gearshift lever in •
any position other than "N", the vehicle may suddenly start moving. When
turning the emergency switch to the "ON" position, be sure to keep the brake
pedal depressed.
When the emergency switch is in the "ON" position, the engine can be started
•
even with the gearshift lever in a position other than "N".
When the engine is started with the transmission in gear, the vehicle may
suddenly start moving. To prevent this, firmly set the parking brake and fully
depress the brake pedal with your right foot when starting the engine.
When the emergency switch is placed in the "ON" position, the shift lock
•
function does not work. If you fail to depress the brake pedal when moving the
gearshift lever from "N" into "D" or "R", the vehicle will suddenly start moving.
Operate the gearshift lever only after holding the brake pedal fully depressed.
NOTE
When the emergency switch is in the "ON" position and the gearshift lever is in •
the "D" or "M" position, the transmission does not shift to any gear other than
the 1st.
2008N_sec04-2_print2.indd 97 3/09/2008 5:31:46 PM