Isuzu N Series 2008, Owner'S Manual

Page: 443 / 580

7-97
SERVICE AND MAINTENANCE
CAUTION
Fully engage the wheel wrench on a wheel nut in order to tighten the nut to the •
specified torque. However, do not use a pipe as a handle extension or your foot
to apply force on the wrench. This would tighten the nut more than required and
might damage components.
Both under-tightening and over-tightening of wheel nuts may cause broken
•
wheel studs or cracked disc wheels and could lead to wheel detachment.
Adhere to the specified tightening torques.
When replacing a tyre with a new one, use only a tyre of the same type and size
•
as the replaced tyre; otherwise, driving safety could be affected. Avoid mixed
use of different types or different size tyres at all costs.
3. Next, tighten the outer wheel nuts to
the specified torque.
WARNING
If you find any abnormal conditions with the wheel nuts such as frequent •
loosening of retightened nuts, have your vehicle checked or serviced at the
nearest Isuzu Dealer as soon as possible.
2008N_sec07-2_print2.indd 97 3/09/2008 5:53:35 PM