Isuzu N Series 2008 Owner'S Manual Download | Manualshive

Page: 564 / 580

background image

8-44

IN CASE OF EMERGENCY

To move a disabled vehicle, it is best to rely on someone in the wrecker or tow truck

business. If that is not possible, follow these procedures.
When towing, use appropriate equipment and comply with local legal requirements.
Do not try to start the engine by towing or pushing the vehicle.

When Towing

CAUTION

For a manual transmission model, place the gearshift lever in the "N" position,

•

and tow for a maximum distance of 10 km (6.2 miles) at speeds less than 40

km/h (25 MPH). Other than the above, disconnect the propeller shaft when

towing to avoid damage to the transmission.
For AMT vehicles, place the gearshift lever in the "N" position and make sure

•

the shift indicator displays "N". Tow for a maximum distance of 10 km (6.2 miles)

at speeds less than 40 km/h (25 MPH).

When the shift indicator does not indicate "N", or in situations other than the

above, disconnect the propeller shaft when towing to avoid damage to the

transmission.
Whenever possible, tow a vehicle with the engine started.

•

If the engine is not started:

The brakes will not be as effective;

-

The steering wheel will be hard to turn;

-

The steering wheel could lock, making it impossible to turn. This is extremely

-

dangerous (particularly when the ignition key is removed).

WARNING

Be sure to chock the wheels when disconnecting the propeller shaft. The

•

vehicle could start to move and cause a serious accident.

2008N_sec08_print2.indd 44

4/09/2008 8:14:35 AM

«
...
562
563
564
565
566
...
»

Summary of Contents for N Series 2008





































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for N Series 2008

Komatsu D41 Series

Brand: Rail-Ability Pages: 34

Brand: Komatsu Pages: 5

Brand: Omcan Pages: 16

Brand: Ravas Pages: 14

Brand: Northwest Manufacturing Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands