Isuzu N Series 2008 Owner'S Manual Download

Page: 318 / 580

5-28

COMFORT AND CONVENIENCE

Back Panel Tray (Storage Receptacle)

Use them for storing small articles. They

can be removed.

Installation and Removal

1. Turn the knob to the "UNLOCK"

position.

2. Lift the back panel tray upward to

remove it from the three tabs.

To install the back panel tray, perform

this action in reverse. After installing

the back panel tray, turn the knob to

the "LOCK" position.

CAUTION

Do not use the back panel tray to

•

hold any object weighing more than

2 kg (71 oz) or an object that may fly

or fall out during vehicle operation.

Doing so would be dangerous.
Items may fly or fall out when the

•

cab is tilted.
Do not leave eyeglasses or a lighter

•

in the vehicle. If the cab became

hot, a lighter left there could explode

and plastic eyeglass lenses or

frames could deform or crack.

2008N_sec05_print2.indd 28

3/09/2008 5:37:34 PM

Summary of Contents for N Series 2008





































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for N Series 2008

Reviews:

Related manuals for N Series 2008

Brands by name

Popular brands

Isuzu N Series 2008, Owner'S Manual

Search results

Summary of Contents for N Series 2008

Reviews:

Related manuals for N Series 2008

Brands by name

Popular brands