Suzuki Carry Pro Manual Download

Page: 1 / 240

52SS0-01E

FOREWORD

This manual should be considered as a

permanent part of the vehicle and should

remain with the vehicle when resold or oth-

erwise transferred to a new owner or oper-

ator. Please read this manual carefully

before operating your new SUZUKI vehicle

and review the manual from time to time. It

contains important information on safety,

operation and maintenance.

All information in this manual is based

on the latest product information avail-

able at the time of publication. Due to

improvements or other changes, there

may be discrepancies between informa-

tion in this manual and your vehicle.

SUZUKI MOTOR CORPORATION

reserves the right to make production

changes at any time, without notice and

without incurring any obligation to

make the same or similar changes to

vehicles previously built or sold.

This vehicle may not comply with stan-

dards or regulations of other countries.

Before attempting to register this vehi-

cle in any other country, check all appli-

cable regulations and make any

necessary modifications.

NOTE:

For vehicles equipped with supplemental

restraint system (airbags), please see the

warning label named “Airbag symbol

meaning” in “FOR SAFE DRIVING” section

for information on front airbag protection.

IMPORTANT

WARNING

CAUTION

NOTICE

NOTE

Please read this manual and follow its

instructions carefully. To emphasize spe-

cial information, the symbol

and the

words

WARNING

CAUTION

NOTICE

and

NOTE

have special meanings. Pay

particular attention to messages high-

lighted by these signal words:

NOTE:

Indicates special information to make

maintenance easier or instructions clearer.

WARNING

Indicates a potential hazard that

could result in death or serious

injury.

CAUTION

Indicates a potential hazard that

could result in minor or moderate

injury.

NOTICE

Indicates a potential hazard that

could result in vehicle damage.

Summary of Contents for Carry Pro

















































































































































































































































Search results

Summary of Contents for Carry Pro

Reviews:

Related manuals for Carry Pro

Brands by name

Popular brands

Suzuki Carry Pro, Manual

Search results

Summary of Contents for Carry Pro

Reviews:

Related manuals for Carry Pro

Brands by name

Popular brands