Isotech TTI-7-R, Operator'S Handbook Manual

Page: 97 / 120

Communications Interface
7.11 System Related Commands
The SYSTem commands are used to control the instrument none-
measurement global parameters.
7.11.1 System command summary
Command Description
DISPIay:BACKIight Sets the display back light mode.
DISPIay:BACKIight? Queries the display back light mode.
SYSTem:BEEPer Sounds a single beep immediately.
SYSTem:BEEPer:STATe Sets the front panel beeper mode.
SYSTem :BEEPer:STATe? Queries the front panel beeper mode.
SYSTem:TIME Sets the internal clock time.
SYSTem :TIME? Queries the internal clock time.
SYSTem:DATE Sets the internal clock date.
SYSTem :DATE? Queries the internal clock date.
SYSTem:DATE:FORMat Sets the internal clock date format.
SYSTem :DATE:FORMat? Queries the internal clock date format.
7.11.2 System commands
DISPIay:BACKIight {mode}
Turns the front-panel display backlight on or off.
Default at power-up is display backlight on.
{mode} 1, on Display backlight on
0, off Display backlight off
DISPlay:BACKIight?
Query the front-panel display backlight mode setting.
Returns 1 Display backlight on
0 Display backlight off
SYSTem:BEEPer
Issue a single beep immediately.
SYSTem:BEEPer:STATe {mode}
Turns the front-panel beeper on or off. Default at
power-up is front-panel beeper on.
{mode} 1, on Front-panel beeper on
0, off Front-panel beeper off
Page 7-29