Isotech TTI-7-R, Operator'S Handbook Manual

Page: 94 / 120

Terminates the current measurement cycle and scanning routine.
Sets the Run/Hold trigger mode to Hold.
TRIGgen:MODE <mode>
This command is used to set the trigger mode to single or infinite.
Setting the trigger mode to single results in a single measurement
being taken when triggered.
Setting the trigger mode to infinite will result in continuous
measurement being taken when triggered.
For IEEE the trigger mode is always forced to single.
If the TRIGger:MODE INF command is sent it will generate a
Command Error and the command will be ignored.
<mode> SINGIe Single shot trigger mode
INFinite Infinite trigger mode (Run/Hold)
Terminates the current measurement cycle and scanning routine.
Sets the trigger mode to the state as defined by the command, when
set to infinite mode the instrument will default to Hold.
TRIGger:MODE?
Query the trigger mode setting.
Returns SING Single shot trigger mode
INF Infinite trigger mode (Run/Hold)
TRIGgen:COUNt <n>
TRIGgen:COUNt <slx>, <n>
The TRIGger:COUNt <n> command is used to set the timer general
cycle count value.
The TRIGger:COUNt <slx>,<n> command is used to set the
individual scanning list timer cycle count values.
<slx> SL1, SL2, SL3, SL4 Specify scan list
<n> 1 to 9999 Specify cycle count value
CONTinuos Cycle count value to continuos
DEFault Cycle count value to continuos
Options and accessories
Page 7-26