Isotech TTI-7-R, Operator'S Handbook Manual

Page: 87 / 120

Terminates the current measurement cycle and scanning routine.
Sets the trigger mode to single shot.
Selects the channel as specified by the command.
Sets the scanner mode to Off.
Sets the logging to memory mode to Off.
Initiates a measurement and fetches a single reading.
MEASure:TEMPerature:RTD?{type},{standard},{con},{current
mode},{root 2}
Sets the selected channel for an RTD measurement according to the
following parameters.
{type} Pt100
{standard} 1 (IEC751)
2 (US/JIS)
3 (EN60751)
4-23 (User Probe 1-20)
{con} 3, 4 (3 or 4 wire connectivity)
{current mode} I, -I, AVE
{root 2}
0, 1
0 = off, 1 = on
Terminates the current measurement cycle and scanning routine.
Sets the trigger mode to single shot.
Selects the channel as specified by the command.
Sets the scanner mode to Off.
Sets the logging to memory mode to Off.
Initiates a single measurement and fetches a single reading.
Communications Interface
Page 7-19