Isotech TTI-7-R, Operator'S Handbook Manual

Page: 95 / 120

Communications Interface
Changing a timer cycle count value that is currently in use will result
in the instrument terminating the current measurement cycle and
scanning routine.
Sets the Run/Hold trigger mode to Hold.
Sets the timer cycle count to the value as specified by the
command.
TRIGger:COUNt?
TRIGgen:COUNt? <slx>
TRIGger:COUNt? queries the timer general cycle count value.
TRIGger:COUNt? <slx> queries the specified scanning list timer
cycle count value.
<slx> SL1, SL2, SL3, SL4 Specify scan list
Returns "1" to "9999"
Cycle count value
"CONT" Cycle count continuos
TRIGger:DELay <hh:mm:ss>
TRIGgen:DELay <slx>, <hh:mm:ss>
The TRIGger:DELay <hh:mm:ss> command is used to set the
required general timer cycle delay time.
The TRIGger:COUNt <slx>,<hh:mm:ss> command is used to set
the required individual scanning list timer cycle delay time.
<slx> SL1, SL2, SL3, SL4 Specify scan list
<hh:mm :ss> 00:00:00 to 99:59:59 Specify timer delay
Terminates the current measurement cycle and scanning routine.
Sets the Run/Hold trigger mode to Hold.
Sets the required timer delay to the value as specified by the
command.
TRIGger:DELay?
TRIGger:DELay? <slx>
TRIGger:DELay? queries the general timer cycle delay time.
TRIGger:DELay? <slx> queries the specified scanning list timer
cycle delay time.
Page 7-27