Isotech TTI-7-R, Operator'S Handbook Manual

Page: 55 / 120

5.6.5 Configuring the data log memory
The TTI-7-R can record up to 4000 readings in none-volatile data log
memory. You can analyse this data either while it is being logged, or
later, even when the TTI-7-R has been disconnected from the
mains. Reviewing statistics or logged data will temporarily suspend
recording of data.
To access the data logger memory menu, select [Mem] from the
data logger menu. The screen displays:
Memory is: Off
Rev New On Off Quit OK
Switching data log to memory on/off: Data logging OFF is the
default condition when the equipment is powered up. To switch on
data logging, select
[On]. Select [Off] to switch off data logging. The
screen message reflects the current data logging status e.g.
Memory is: OFF/Memory is: ON.
Clearing previously stored results: Select the [New] option to
delete all previously recorded data log results. The screen displays :
Clear the current log?
Yes No
Quit
Press [Yes] to clear the log. As deleted data cannot be retrieved,
you are asked to confirm that this is what you want to do by pressing
[Yes] again. This takes you back to the previous screen. [Quit]
takes you to the Temperature Measurement screen.
You need to record some actual data before using the [Rev] option
on this menu as described in Section 5.5.3.
Operating the TTI-7-R
Page 5-21