Isotech TTI-7-R, Operator'S Handbook Manual

Page: 51 / 120

Operating the TTI-7-R
5.6 Data Logger
The TTI-7-R is fitted with a very powerful easy to use data logger.
The data logger consists of three functions, each function can be
used independently, or all three functions can be combined to
provide the powerful data logger.
5.6.1 Data logger functions
Scan: The scanner function lets you switch between a number of
input channels. Up to four independent scanning lists can be
configured and stored in non-volatile memory. A scanning list
consists of a list of channels, the timer cycle delay, sample rate and
cycle count. Each scanning list can be quickly set-up, reviewed and
edited.
Timer: The built in timer can be programmed to control the cycle
delay, sample rate and the cycle count.
Mem: Up to 4000 readings can be stored to none-volatile memory with
a time and date stamp for review later.
5.6.2 Setting up the data logger
Press the SCAN key to bring up the data logger menu. The
screen displays:
Scanner is: Off Memory is: Off
Scan Timer Mem Quit OK
The first line of the menu shows the current configured state of the
data logger modules.
Scanner is: Indicates the scanner is OFF or the selected scan list
when the scanner is ON.
Memory is: Indicates the data logging to memory ON/OFF state.
Page 5-17