Isotech TTI-7-R, Operator'S Handbook Manual

Page: 39 / 120

5.3.2 System Configuration
On power-up the TTI-7-R performs a system configuration
check searching for input channel expansion cards or
communication card. The screen displays:
Checking system configuration
The following information is read from each card on detection and
displayed by the system configuration display for 2 seconds.
Communication card
RS-232, Baud rate, Character bits, Parity, Start bit, Stop bit.
IEEE488.2, Address.
Input channel expansion card
Card ID, Serial Number, Card type, Channel numbers.
Figure 5.6 - Example System Configuration Display
System configuration
RS-232 9600,8,0,1,2
Card A1 Sn12345 4Ch TC Ch A1 to A4
Card B1 Sn30123 4Ch PRT Ch B1 to B4
The system configuration can also be reviewed from the options
menu.
After the power-up sequence, the instrument begins its normal
operation.
Operating the TTI-7-R
Page 5-5