Isotech TTI-7-R, Operator'S Handbook Manual

Page: 92 / 120

Options and accessories
ROUTe:SCAN:INTernal <slx>, <scanlist>
This command is used to configure the specified scanning lists for
the internal scanner cards.
<slx> SL1, SL2, SL3, SL4 Select scanning list
<scanlist> A0, A1, A2, A3, A4, Set channel active
B0, B1, B2, B3, B4
To configure a scanning list specify the scanning list number
followed by a list of channels that are required to be active in the list.
Only channels that are available should be specified or the
command will be ignored.
To query a scanning list use the ROUTe:SCAN:INT? <slx>
command.
Configuring a scanning list that is in use will result in the instrument
terminating the current measurement cycle and scanning routine.
Sets the Run/Hold trigger mode to Hold. Sets the scanning list as
specified by the command.
ROUTe:SCAN:INTernal? <slx>
Query the configuration of a scanning list.
The instrument will return a list of selected channels in the specified
scanning list or NONE for an empty scanning list.
<slx> SL1, SL2, SL3, SL4 Select scanning list
Returns "A0, B0, A1, A2, A3, List of active channels
A4, B1, B2, B3, B4"
"NONE" Empty scanning list
Page 7-24