manualshive.com logo in svg

Isotech TTI-7-R, Operator'S Handbook Manual

Share
Download
Isotech TTI-7-R Operator'S Handbook Manual Download Page 111

 

8.1 Accessories

 

The following interfaces may be retro-fitted to the TTI-7-R 

 

Order Suffix 

Description

 

TTI-7-R -INT-D 

RS232C Communications interface

 

TTI-7-R -INT-L 

IEEE 488 Communications interface

 

The analogue output option must be specified at the time the 
instrument is ordered from the factory. It is not possible to retro-
fit the analogue output option.

 

Other options available for the TTI-7-R include:

 

Part Number 

Description

 

TTI-7-R-DP 

DIN plug to 5-pin screw terminal plug

 

converter 

TTI-7-R-SC

 

Soft carry case

 

8.2 High Temperature PRTs

 

 

 

WSP 660

 

R

O

 

100 

Ω

 

 Alpha 

0.00392

 

Range

 

-189°C to +650 
°C

 

Sheath

 

Inconnel

 

Sheath size

 

16” x 0.25

 

Cable Length

 

2 metres

 

 

 Page 

8-1 

8. Options and Accessories

Summary of Contents for TTI-7-R

























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands