Isotech TTI-7-R, Operator'S Handbook Manual

Page: 110 / 120

Options and accessories
7.15 Analogue Output
The TTI-7-R analogue output provides an output voltage in the range
of ±2 Volts that is directly proportional to the displayed reading and
selected scaling factor. The analogue output is updated on
completion of every measurement cycle and is obtained from the
digital measurement by digital to analogue conversion.
7.15.1 Specification
Resolution 1°C
Sensitivity 1 mV/ °C
Analogue Output range ±2V F.S.
7.15.2 Default Settings
On power up, the TTI-7-R will initialise with the following settings:
Measurement units deg C
Measurement PRT Input PRT Input A
Resolution Low resolution
7.15.3 Analogue Output Connection
Connection to the analogue output is via an insulated BNC output
socket on the rear panel of the TTI-7-R . Connection to peripheral
equipment should be made via a suitable twin core, twisted pair
screened cable to the instrumentation input amplifier of the
peripheral equipment, (see Figure 7.1).
Figure 7.1 - Twin Core, Twisted Pair, Screened Cable
Page 7-42