Goodrive3000 series medium voltage VFD
Goodrive3000 inverter
-67-
Function
code
Name
Description
Setting range
Default
P01.13
FWD/REV running
deadzone time
0.0
–3600.0s
0.0
–3600.0
0.0s
P01.14
FWD/REV running
switching mode
0: Switch at zero frequency
1: Switch at the starting frequency
2: Switch after the speed reaches the
stop speed with a delay
0
–2
0
The function code is used to set the shifting mode between forward running and reverse running.
This function code indicates the transition time specified in P01.13 during FWD/REV rotation switching. See the following
figure:
Braking time
before start
Acceleration
Constant
speed
Decele-
ration
Wait time before DC
braking for stop
DC braking
time for stop
ON
OFF
Run
command
Time t
Start delay
time
Function
code
Name
Description
Setting range
Default
P01.15
Stop speed
0.00
–100.00Hz
0.00
–100.0
0.50Hz
P01.16
Stop speed detection
mode
0: Detect by the speed setting (without
speed delay)
1: Detect by speed feedback (valid only
for vector control)
0
–1
0
P01.17
Feedback speed
detection time
0.0
–100.00 s (valid when P01.16=1)
0.0
–100.0
0.5s
The function code is used to set the stop speed detection mode.
0: Detect by the speed setting (without speed delay). This is the only detection method in V/F mode.
1: Detect by speed feedback (valid only for vector control)
In vector control or P01.16=0, when the ramp reference frequency is less than or equal to the set value of P01.15 and
passes delay time of stop speed P01.24, the VFD will coast to stop immediately.
In vector control or P01.16=1, when the actual frequency is less than or equal to the set value of P01.15, the VFD will
coast to stop immediately; when the frequency is larger than the set value, the VFD will stop after the delay time of
P01.17.
Function
code
Name
Description
Setting range
Default
P01.18
Terminal-based running
command protection at
power-on
0: The terminal running command
is invalid at power-on
1: The terminal running command
is valid at power-on
0
–1
0
When the channel of running commands is terminal control, the system detects the state of the running terminal during
power-on.
