INVT Goodrive3000 Series, Operation Manual

Page: 222 / 251

Goodrive3000 series medium voltage VFD PROFIBUS communication
-216-
Parameter
number
Parameter
name
Optional
setting
Default Remarks
is not defined, communication between the
communication card and VFD cannot be
established.
1
Node
address
0
–99
2
In PROFIBUS network, each device
corresponds to a unique node address, you
can use the node address selection switch
to define node address, but you cannot
adjust the parameter by yourself and the
parameter is only used to display the node
address.
2
Baud rate
setting
0: 9.6kbit/s
1: 19.2 kbit/s
2: 45.45 kbit/s
3: 93.75 kbit/s
4: 187.5 kbit/s
5: 500 kbit/s
6: 1.5 Mbit/s
7: 3Mbit/s
8: 6 Mbit/s
9: 9 Mbit/s
10: 12 Mbit/s
6
3 PZD2 0
–65535
0
4 PZD3 0
–65535
0
...
…
0
–65535
0
10 PZD12 0
–65535
0
Master station and VFD should be configured so that the master station can communicate with the communication card
after correctly installing EC-TX103 communication card.
2. Module type
This parameter shows communication module type detected by VFD; users can not adjust this parameter. If this
parameter is not defined, communication between the communication card and VFD cannot be established.
3. Node address
In PROFIBUS network, each device corresponds to a unique node address, you can use the node address selection
switch to define node address (switch isn’t at 0) and the parameter is only used to display the node address. If node
address selection switch is 0, this parameter can define node address.
In PROFIBUS network, each device corresponds to a unique node address, you can use the node address selection
switch to define node address, but you cannot adjust the parameter by yourself and the parameter is only used to display
the node address.
4. GSD file
Each PROFIBUS subsidiary station on the PROFIBUS bus need to have "device description document" named GSD file
which used to describe the characteristics of PROFIBUS-DP devices. GSD file contains all defined parameters, including
the supported baud rate, information length, amount of input/output data, meaning of diagnostic data.
A CD-ROM will be offered in which contains GSD file of the EC-TX103 communication card (expansion name is .gsd) for
fieldbus adapter. Users can copy GSD file to relevant subdirectory of configuration tools. Please refer to relevant system
configuration software instructions to know specific operations and PROFIBUS system configuration.