INVT GD300-01A, Operation Manual

Page: 140 / 187

Goodrive300-01A series VFD for air compressor External optional accessories
-134-
B.2.4.3 Setting interface
In the main interface, you can press Set to enter the following interface:
03.17 16:02:35
Home
Reset
Return Confirm
Set
Load
Unload
Start
Stop
Figure B-12 Setting interface
In this interface, you can press the Up or Down key to select different operation functions. Then press
OK for control; press Back or Home to return to the working
environment interface.

Reset: enables you to reset a fault that the master VFD or fan VFD encounters.

Load/Unload: controls the start or stop of the intake valve in manual loading or unloading mode.

Start: enables you to start the device. The device can be started only in standby state.

Stop: enables you to stop the device.
Note : You can implement the start, stop, and reset functions by pressing the RUN and STOP/RST
keys on the keypad.
B.2.4.4 Alarm interface
You can press Alarm in the main interface to access real-time alarm interface and view all
the alarm records since the device power-on.
Note : This function equals the shortcut to Menu > Fault records > Real-time alarm . The only
difference is that a real-time alarm that is accessed by using this shortcut method cannot be cleared
in this interface and it can be cleared only in the fault record interface.