Intrepid Control Systems neoVI FIRE 2 User Manual Download Page 7

Page: 7 / 87

neoVI FIRE 2 User’s Guide

Version 2.1 - October 10, 2016

Figure 2: neoVI FIRE 2 Package Contents.

Starting top center with the FIRE 2 itself and going clockwise: µDB-9 to DB-9

conversion cable; USB cable; microSD card reader; FIRE 2 Ethernet Cable Adapter; neoVI-OBD-1 cable. The software/driver

CD can be found in the center. Note that the OBD cable you receive may differ from the one shown here.

Software

In the FIRE 2 package you will find a software/driver CD containing:

•

A copy of Intrepid’s Vehicle Spy vehicle network software.

•

Drivers for the neoVI FIRE 2.

•

An API install kit containing the neoVI Explorer utility for configuring the device.

•

Documentation materials.

Intrepid’s Vehicle Spy (often abbreviated as

VSpy

) is the “Swiss army knife” of automotive

networking tools. It allows you to easily monitor and transmit on vehicle networks, and includes

capabilities for ECU simulation, data acquisition, scripting, diagnostics, data analysis and much

more.
The neoVI FIRE 2 and Vehicle Spy are designed to work together hand in hand, and we

recommend purchasing a VSpy license to go along with your new hardware. If you did so, then

a full copy of the software will be included on the software/driver CD. If you did not purchase

Summary of Contents for neoVI FIRE 2
























































































Search results

Summary of Contents for neoVI FIRE 2

Reviews:

Related manuals for neoVI FIRE 2

Brands by name

Popular brands

Intrepid Control Systems neoVI FIRE 2, User Manual

Search results

Summary of Contents for neoVI FIRE 2

Reviews:

Related manuals for neoVI FIRE 2

Brands by name

Popular brands