Intrepid Control Systems neoVI FIRE 2 User Manual Download Page 2

Page: 2 / 87

neoVI FIRE 2 User’s Guide

Version 2.1 - October 10, 2016

Version History

Version

Number

Date

Description / Major Changes

1.0

2016/01/06

Initial release.

2.0

2016/06/10

Revised package contents.

Added photos of FIRE 2 in box and accessories.

Removed mention of certain features that have not yet been implemented.

Added note on avoiding problems with third-party USB cables.

Rewrote section on included cables and options.

Added pictures of new cable options.

Added new images of cable connectors.

Updated software install screenshots.

Expanded hardware hookup diagram section

Revised existing hardware hookup diagram and added new ones for all OBD

cable options.

Rewrote instructions for cable connection to correspond to new cables.

Added many new pinout tables for new cables and connectors, and converted

section on cable pinouts to chapter due to size.

Added cable signal mapping tables to show signal correspondence between

connector pins on each cable.

Added contact information for international ICS offices.

2.1

2016/10/10

Corrected miscellaneous I/O hardware connections.

Corrected several pinout tables and clarified that the neoVI FIRE 2 does not

support J1850 or J1708.

Updated contact information for international ICS offices.

Summary of Contents for neoVI FIRE 2
























































































Search results

Summary of Contents for neoVI FIRE 2

Reviews:

Related manuals for neoVI FIRE 2

Brands by name

Popular brands

Intrepid Control Systems neoVI FIRE 2, User Manual

Search results

Summary of Contents for neoVI FIRE 2

Reviews:

Related manuals for neoVI FIRE 2

Brands by name

Popular brands