Intrepid Control Systems neoVI FIRE 2 User Manual Download Page 61

Page: 61 / 87

neoVI FIRE 2 User’s Guide

Version 2.1 - October 10, 2016

ISO 15765-2

This page contains one setting:

IFS Shift Register

(Figure 75). Changing this from its default

value of 0 causes time to be added to the Inner Frame Spacing of USDT frames transmitted

by CoreMini scripts running in the FIRE 2. The number entered is multiplied by 6.4 µs to

determine the time offset. The allowed range is -1563 to 1563.

Figure 75: neoVI Explorer IFS Shift Register Parameter for ISO 15765-2.

Text API

These parameters control the operation of the text API that can be used to operate the neoVI

FIRE 2 using third party software. Please contact Intrepid if you require assistance with using

the API.

Figure 76: neoVI Explorer Text API Parameters.

Network Enables

This area provides more options for controlling the enabling and disabling of individual

networks within the FIRE 2 (Figure 77). The main display contains a scrollable list with

checkboxes that can be set or unset to enable or disable each network. These are equivalent

to the Enable checkboxes found in the parameter areas for the corresponding networks.

Summary of Contents for neoVI FIRE 2
























































































Search results

Summary of Contents for neoVI FIRE 2

Reviews:

Related manuals for neoVI FIRE 2

Brands by name

Popular brands

Intrepid Control Systems neoVI FIRE 2, User Manual

Search results

Summary of Contents for neoVI FIRE 2

Reviews:

Related manuals for neoVI FIRE 2

Brands by name

Popular brands