neoVI FIRE 2 User’s Guide
54
© 2016 Intrepid Control Systems, Inc.
Version 2.1 - October 10, 2016
Figure 69: neoVI Explorer SW CAN Parameters with Default Settings.
4.6 LIN Networks (LIN1 to LIN4)
This section of the FIRE 2 explorer tree allows you to enable, disable and configure its four LIN
channels, LIN1 to LIN4. Each channel has an entry under the “LIN” group (Figure 70). As with
the CAN channels, a green checkmark indicates that a particular channel is enabled, while a
red X means it is disabled.
Figure 70: neoVI Explorer LIN Group.
All of these channels have the same parameters, which can be seen in Figure 71. In this image
we have selected the
Advanced Options
checkbox to display its options (described below).
Figure 71: neoVI Explorer LIN Parameters, with Default Settings and Advanced Options Displayed.
