Intrepid Control Systems neoVI FIRE 2 User Manual Download Page 70

Page: 70 / 87

neoVI FIRE 2 User’s Guide

Version 2.1 - October 10, 2016

Advanced Features

In this chapter we provide additional information on some of the neoVI FIRE 2’s new and

advanced features.
Note that some of these features are not yet currently implemented in the neoVI FIRE 2, but

their capabilities will be provided in future firmware upgrades, at which time this manual will be

updated to explain their use.

6.1 neoVI API

The neoVI FIRE 2 comes with support for a full API that allows you to control the device

from other software packages or custom-written software. For instructions on using the API,

please consult its documentation on the Intrepid website at:

http://www.intrepidcs.com/support/

ICSDocumentation/neoVIDLL/neoVIDLLhelpdoc.html

6.2 USB Host

The neoVI FIRE 2 comes with a USB host port that allows other devices to be plugged into it

(see Figure 6 in Section 2.3

). Due to the difficulties associated with driver development, this

port is intended for specific devices rather than general purpose use. It is especially designed

to work with devices such as the Intrepid neoVI MIC microphone/trigger pendant, or the RAD-

Moon (as seen in Section 5.3).

Summary of Contents for neoVI FIRE 2
























































































Search results

Summary of Contents for neoVI FIRE 2

Reviews:

Related manuals for neoVI FIRE 2

Brands by name

Popular brands

Intrepid Control Systems neoVI FIRE 2, User Manual

Search results

Summary of Contents for neoVI FIRE 2

Reviews:

Related manuals for neoVI FIRE 2

Brands by name

Popular brands