Intermec 502O, User Manual

Page: 93 / 402

jjjj
39
Configuring the 5020
helveticacondensed
3-17
3
Configuring the 5020 by Using SNMP
The 5020 is an SNMP-enabled device. You can use an SNMP management station to
control and configure the 5020 anywhere on an SNMP enabled network.
The 5020 supports proprietary Management Information Bases (MIBs). You will find
the MIB files for the 5020 in these two places:
•
on the Software Developer’s Kit (SDK) and Support Files CD-ROM (Part No.
069511) that shipped with this manual
•
on www.intermec.com
There are six MIB files:
MIB File Description
intermec.mib Defines the root of the Intermec MIB tree.
itcadc.mib Defines objects for Automated Data Collection. For example, bar code
symbologies.
itcfile.mib Defines objects for manipulating and viewing files. For example, TFTP
Timeout.
itcnetwork.mib Defines objects for Network parameters. For example, 5020 IP address.
itcsnmp.mib Defines objects for Intermec SNMP parameters and security methods.
For example, SNMP security IP address.
itcterminal.mib Defines objects for terminal parameters. For example, keypad clicker.
In addition to the MIB files, Intermec provides SNMP support for MIB II through seven
read-only MIB II (RFC1213-MIB) OIDs. You can only query these seven OIDs through
an SNMP management station. The OIDs are not available in the Configuration
application nor the remote Unit Management application.
The seven read-only MIB II OIDs are listed and defined in the next table.
MIB II Item OID Group or Table Description
ifNumber 1.3.6.1.2.1.2.1.0 Interfaces group Indicates the number of adapters
present in the system. For the 5020, if
one adapter is present in the system,
then ifNumber = 1 and ifIndex = 1.
ifIndex 1.3.6.1.2.1.2.2.1.1.ifIndex Interfaces table
(ifTable)
A unique value for each interface. The
value ranges between 1 and the value of
ifNumber.
ifDescr 1.3.6.1.2.1.2.2.1.2.ifIndex Interfaces table
(ifTable) A textual string containing information
about the interface.