Intermec 502O, User Manual

Page: 25 / 402

nuggetf
code39
Getting Started
1-5
1
Models and Options
The 5020 family of Data Collection PCs includes these models:
5020
Batch
The basic 5020 PC has a Type II PC card slot and supports the use of Type I
and Type II 16-bit memory and input/output (I/O) cards.
5020
RF
The RF version of the 5020 has a frequency hopping spread spectrum radio. See
your Intermec sales representative for information about the availability of other radio
options.
These options are available for the 5020:
•
Integrated scanner (standard or long-range) or tethered scanner port
•
Keypads to support western European languages
This manual tells you how to use the features and options available on all models of the
5020.
Equipment You Need to Get Started
To use the 5020, you need this equipment:
•
Main battery pack (Part No. 068537)
•
TZ2400 battery charger, L5020 serial adapter and power supply (Part No. 065236),
or D5020 communications dock
Note: Intermec recommends that you keep at least two main battery packs on hand so
that you can use one battery pack while the other is recharging. You should keep a
main battery pack in the 5020 at all times to prevent the risk of data loss.
Getting the 5020 Up and Running
Now that you have the required equipment, follow these steps to start using your new
5020:
1. Unpack the 5020 and documentation.
2. Charge the main battery pack (sold separately).
3. Install a charged main battery pack. Wait for the 5020 to initialize after you install
the charged main battery pack.