Intermec 502O, User Manual

Page: 358 / 402

5020 Data Collection PC User’s Manual
Nugg
Co d e 39
C-10
Importing a Registry File
Once you have extended the remote Unit Management application on a 5020, you can
import the customized registry file into another 5020. You may also need to import the
registry file if you cold boot the 5020.
Note: If you cold boot the 5020, you will lose all registry changes and extensions.
Make sure you export the registry file on your development PC and save a backup copy.
To import a registry file
1. Copy the registry file from your development PC to the 5020. For help, see
Chapter 5, “Managing Your 5020.”
2. On the 5020, choose Run from the Start menu.
3. Type this command and choose OK:
itcconfig.exe
filename.reg
where filename.reg is the name of your customized registry file for the remote Unit
Management menu.
4. Repeat Steps 1 through 3 for each 5020.
Note:
ITCCONFIG.EXE
is only designed to import 5020 properties. It is not a full-
featured registry import application.
Registry Property Values
These are the possible values that can go in the registry for the remote Unit
Management application. Every property (menu option) must have a DisplayName,
Ordinal, and Value.
Break
Purpose: Defines a line break before a menu item. Break is equivalent to the HTML tag, <BR>.
Syntax: "Yes"
Required Field: No
Example: A break is set before the Who To Call menu item.
[HKEY_LOCAL_MACHINE\SOFTWARE\Intermec\RUM_MENU\WhoToCall]
"DisplayName"="Who to Call"
"Value"="http://www.intermec.com/support.htm"
"Ordinal"="7"
"Break"="Yes"