Intermec 502O, User Manual

Page: 110 / 402

5020 Data Collection PC User’s Manual
39
jjj
Helveticcond blk
3-34
Configuring the Baud Rate
The baud rate you set for the 5020 IrDA port must match the baud rate set for the serial port
on the connected device. Configure the baud rate using the Configuration application, the
Unit Management application, or SNMP. You must connect the 5020 to a D5020
communications dock or an L5020 serial communications adapter to set the IrDA baud rate.
To configure the baud rate
1. If the Configuration application is not open, press
. Choose Programs and
then Configuration.
2. Press
" to access the Configure menu.
3. Press
! to select Unit and then press &. The Unit configuration screen appears.
4. Press
9 to select the Serial Port configuration tab and then press 3 to select the
IrDA baud rate.
5. Press
3 and use the cursor keys to select the baud rate.
6. To save your changes, press
3 to select the Apply button and then press &.
7. Press
" to exit the Configuration application.
8. Press
! to highlight Exit and then press &.
9. Press
' twice to have the changes take effect.
Once the 5020 is connected and configured, you are ready to connect and transfer data
between the 5020 and the device that is connected to the IrDA or RS-232 serial port.
You use Windows CE Services to establish a serial connection. For help, see Chapter 5,
“Managing Your 5020.”