Intermec 502O, User Manual

Page: 200 / 402

5020 Data Collection PC User’s Manual
N
ugg
Co d e 39
7-6
Exit Accumulate Mode
Purpose: Exits Accumulate mode and transmits the current data record. If no data has been
accumulated, an empty data record is entered.
From Network: Not supported
Keypad: Not supported
Scan: Exit Accumulate Mode
*-/*
*-/*
Operating Reader Commands
The reader commands you can use to operate or change the 5020’s configuration are
listed in this section. The operating commands are listed in alphabetical order. You will
find the purpose, syntax for commands sent from a network device in a UDP Plus
network, and bar code labels for these reader commands in this section.
•
Backlight On and Off
•
Change Configuration
•
Multiple-Read Labels
•
Scanner Trigger On and Off
•
Set Time and Date
Backlight On and Off
Purpose: Turns the backlight on to easily view the 5020 screen in dimly lit environments.
From Network: %.1
You can send the command from a device such as the DCS 300 in a UDP Plus network.
Keypad: Press
2 to turn the backlight on or off.
Scan: Backlight On
*%.1*
*%.1*