Intermec 502O, User Manual, Page: 30 / 402

5020 Data Collection PC User’s Manual nuggetf
code39
1-10
7. Hook the top clip of the handstrap over the dowel pin on the top of the 5020 and set
it in place.
5020U066.eps
Dowel pin
Note: The handstrap works best if it crosses the entire back of the hand and not just
the fingers. You can hook the top end of the strap on either the left or right side of the
5020 so you can use either hand.
Charging the Bridge Battery
The 5020 comes with a rechargeable bridge battery that maintains the contents of RAM
while the main battery pack is being replaced. For more information about the bridge
battery, see “Understanding the Bridge Battery” in Chapter 2.
Caution
The 5020 is shipped with a discharged bridge battery. Do not rely on the bridge
battery to maintain the contents of RAM until it has been fully charged.
Conseil
Le 5020 est livré avec une batterie en pont déchargée. Ne vous fiez pas à cette
batterie pour conserver le contenu de la mémoire vive avant que la batterie soit
entièrement chargée.
To charge the bridge battery
1. Install a fully charged main battery pack. For help, see “Installing the Main Battery
Pack” earlier in this chapter.
2. The bridge battery recharges from the main battery pack or from an AC power
source. It takes 72 hours at room temperature to charge a discharged bridge battery.
The bridge battery is partially charged and operational after 36 hours.