Intermec 502O, User Manual, Page: 334 / 402

5020 Data Collection PC User’s Manual
A-10
Default Configuration for SNMP
Parameter Default Saved on Cold Boot
Identification Contact No characters No
Identification Location No characters No
Identification Name No characters No
Security Encryption Key NULL No
Security IP Address None (5020 accepts requests from any host) No
Security Read Encryption Off No
Security Read Only Community String public No
Security Read/Write Community String private No
Security Subnet Mask None No
Security Write Encryption Off No
Trap Authentication On No
Trap Community Name NULL No
Trap IP Address None No
Trap Port 162 No
Trap Threshold 10 No
Default Configuration for UDP Plus
Parameter Default Saved on Cold Boot
Acknowledgement Delay Lower Limit 300 ms No
Acknowledgement Delay Upper Limit 5 seconds No
Controller Connect Check Receive Timer 45 seconds No
Controller Connect Check Send Timer 20 seconds No
Controller IP Address 0.0.0.0 No
Maximum Retries 7 No
Network Loopback Disabled No
Network Port 5555 No
UDP Plus Enable Disabled Yes