Intermec 502O, User Manual

Page: 37 / 402

nuggetf
code39
Getting Started
1-17
1
Where Do You Go From Here?
Now that your new 5020 is up and running, you can use this manual to learn how to
perform these tasks:
Task or Feature See This Chapter
To learn how to use the keypad, desktop,
batteries, internal flash, and PC Cards. Chapter 2, “Learning How to Use the 5020”
To learn how to configure your 5020
using SNMP, bar codes, and unit
manager software. Chapter 3, “Configuring the 5020”
To learn how to configure your 5020
using the control panel applets. Chapter 4, “Customizing the 5020 Using the
Control Panel”
To learn how to use the CE Services and
Remote Unit Management applications. Chapter 5, “Managing Your 5020”
To learn about developing and installing
applications on your 5020. Chapter 6, “Developing and Installing
Applications”
To find the commands that you can use
while operating the 5020. Chapter 7, “Reader Command Reference”
To find an explanation of all the
configuration commands supported on
the device. Chapter 8, “Configuration Command Reference”
For help solving problems while using
your 5020. Chapter 9, “Troubleshooting”
For a list of physical and environmental
specifications. Appendix A, “5020 Specifications”
For a table of ASCII characters and their
binary, hexadecimal, and Code 39
equivalents. Appendix B, “Full ASCII Charts”
Explains how to extend and customize
the remote Unit Management application.
It includes 5020 registry definitions and
examples. Appendix C, “Extending Remote Unit
Management”
Explains how to extend and customize
the local and remote Configuration
applications. It includes 5020 registry
definitions and examples. Appendix D, “Extending the Configuration
Application”