Intermec 502O, User Manual

Page: 27 / 402

nuggetf
code39
Getting Started
1-7
1
•
Authorized Service Location sheet
•
Safety supplement
Charging the Main Battery Pack
The main power source for the 5020 is a 1500 mAh lithium-ion battery pack (Part No.
068537). Before you can use the 5020, you must fully charge the main battery pack.
The 5020 will not operate without a main battery pack even when it is connected to an
AC power source.
Warning
The lithium-ion battery pack used in this device may present a fire or chemical burn
hazard if mistreated. Do not disassemble, heat above 100°C (212°F), or incinerate.
Avertissement
Le bloc-batterie au lithium utilisé dans cet appareil peut présenter un risque
d’incendie ou de brûlure chimique en cas de mauvais traitement. Ne désassemblez
pas, ne chauffez pas à une température supérieure à 100 °C (212 °F) et n’incinérez
pas ce bloc-batterie.
To charge the main battery pack
•
Place the main battery pack in an empty slot in the battery charger. The main
battery pack is fully charged in about 3 hours. For help, see the documentation that
came with your battery charger.
You can also use the D5020 communications dock or the L5020 serial communications
adapter to trickle-charge the battery pack.. For help, see the D5020 Communications
Dock Getting Started Guide (Part No. 068976) or the L5020 Serial Communications
Adapter Quick Reference Guide (Part No. 068978).
DISPOSE OF USED MAIN BATTERY PACKS PROMPTLY. KEEP AWAY FROM
CHILDREN. Contact your local Intermec sales representative for replacement main
battery packs.
Warning
Replace the main battery pack with Part No. 068537 only. The use of any other
battery pack may present a risk of fire or explosion.
Avertissement
Remplacez le bloc-batterie principal par la pièce réf. n° 068537 seulement.
L’utilisation de tout autre bloc-batterie présente un risque d’incendie ou
d’explosion.