Intermec 502O, User Manual

Page: 271 / 402

Nugg
Co d e 39
Configuration Command Reference
8-69
8
Acceptable values for data are:
0 All Intermec-compatible scanners (including wands)
4 Intermec 1545 laser scanner
7 Intermec decoded output scanner (Intelligent Input Devices or IID)
8 Intermec 155x laser scanners
10 Internal standard-range scanner
11 Internal long-range scanner
12 Internal extra long-range scanner
13 Internal raster scanner
SS0 through SS8 work only when a tethered scanner is connected to the 5020. SS10
through SS13 are set at the Intermec factory to match the integrated scanner that is
installed in the 5020. If you have an internal scanner, do not change the Scanner
Selection command or the scanner may not function properly.
Note: See your Intermec sales representative for information about the availability of
the internal extra long-range scanner and internal raster scanner.
Default: All compatible scanners for tethered scanner
Internal scanner (10-13) to match the factory-installed scanner
Scan: One of these bar codes:
All Intermec-Compatible Scanners 1545 Laser Scanner
*$+SS0* *$+SS4*
*$+SS0* *$+SS4*
Decoded Output Scanner 155X Laser Scanners
*$+SS7* *$+SS8*
*$+SS7* *$+SS8*
Internal Standard-Range Scanner Internal Long-Range Scanner
*$+SS10* *$+SS11*
*$+SS10* *$+SS11*
Internal Extra Long-Range Scanner Internal Raster Scanner
*$+SS12* *$+SS13*
*$+SS12* *$+SS13*