Intermec 502O, User Manual

Page: 386 / 402

5020 Data Collection PC User’s Manual
I-6
commands (continued)
rules for creating bar codes, 3-20
Scanner Mode, 2-36
communications
adapter, See L5020 serial communications adapter
connectivity options, A-5
default settings, A-9
dock, See D5020 communications dock
Ethernet, using, 3-21
functions, SDK, 6-6
IrDA, using, 3-31
properties, setting, 4-4
protocol stack, illustrated, A-5
RF specifications, A-5
RF, using, 3-21
serial, cables, A-7
serial, using, 3-31
community name, SNMP trap, 8-85
community string
SNMP read only, 8-80
SNMP read/write, 8-81
SNMP security write encryption, 8-83
SNMP trap authentication, 8-84
compact flash card
applications, using to install, 6-11
inserting, 2-30
supported, 2-30
company name, entering on 5020, 4-12
configuration
application
accessing, 3-4, 3-13
baud rate, setting, 3-34
Configure menu, 3-5
Defaults button, 3-12
described, 1-15
DHCP network parameters incorrect, 9-6
Edit menu, 3-5
Ethernet tab missing, 9-7
extending, D-5
File menu, 3-5
menus, illustrated, 3-6
navigating in, 3-8
network parameters, configuring, 3-23
parameters missing or Not Available, 9-8
radio or Ethernet parameters did not take effect, 9-7
Refresh button, 3-12
scanner selection options, customizing, D-6
scanner tab, customizing, D-8
screens, illustrated, 3-7, 3-15, D-3
Troubleshoot menu, 3-5
commands
5020 IP Address, 8-7
Access Point MAC address, 8-8
Access Point Name, 8-8
Acknowledgement Delay Lower Limit, 8-9
configuration, commands (continued)
Acknowledgement Delay Upper Limit, 8-9
Automatic Shutoff, 8-10
bar code commands by syntax, A-12
Baud Rate, 8-46
Beep (Speaker) Volume, 8-15
Beep Duration, 8-12
Beep Frequency, 8-14
category, listed by, 8-4
Codabar, 8-17
Code 11, 8-19
Code 128, 8-30
Code 16K, 8-20
Code 2 of 5, 8-21
Code 39, 8-23
Code 49, 8-27
Code 93, 8-29
Configuration Manager Enable, 8-31
Configuration Subagent Enable, 8-32
Controller Connect Check Receive Timer, 8-33
Controller Connect Check Send Timer, 8-34
Controller IP Address, 8-35
Decode Priority, 8-36
Decode Security, 8-38
Default Router, 8-39
DHCP, 8-40
DHCP Status, 8-41
Display Backlight Level, 8-42
Display Backlight Timeout, 8-42
Interleaved 2 of 5, 8-44
Keypad Caps Lock, 8-47
Keypad Clicker, 8-48
Maximum Retries, 8-49
MSI, 8-50
Network Loopback, 8-52
Network Port, 8-53
Plessey, 8-54
Postamble, 8-55
Preamble, 8-56
Primary DNS Server, 8-58
Primary WINS Server, 8-59
Radio MAC Address, 8-60
Radio ROM Version, 8-60
RF Domain, 8-61
RF Inactivity Timeout, 8-62
RF Roaming Allowed, 8-63
RF Security ID, 8-64
RF Transmit Mode, 8-65
scan and nothing happens, 9-8
Scanner Mode, 8-66
Scanner Redundancy, 8-67
Scanner Selection, 8-68
Scanner Timeout, 8-70
Scanner Trigger, 8-72
Secondary DNS Server, 8-73