Intermec 502O, User Manual

Page: 293 / 402

Nugg
Co d e 39
Configuration Command Reference
8-91
8
TFTP Resend Limit
Purpose: The TFTP resend limit identifies the maximum number of resent data blocks during a
Put to server request.
Configuration: Use one of these methods:
Configuration
Applications
SNMP Bar Codes
Yes Yes No
In the Configuration or Unit Management application, choose Configure and then
Network. Next, choose Protocols, then TFTP, and finally choose Resend Limit. For
help, see Chapter 3, “Configuring the 5020.”
On Cold Boot: Saved
SNMP OID: 1.3.6.1.4.1.1963.10.3.3.1.11.0
Options: An acceptable value for the TFTP resend limit is any value from 10 to 10,000.
Default: 100
TFTP Timeout
Purpose: The TFTP timeout sets the amount of time that the 5020 will wait for a response from a
TFTP server.
Configuration: Use one of these methods:
Configuration
Applications
SNMP Bar Codes
Yes Yes No
In the Configuration or Unit Management application, choose Configure and then
Network. Next, choose Protocols, then TFTP, and finally choose Timeout. For help, see
Chapter 3, “Configuring the 5020.”
On Cold Boot: Saved
SNMP OID: 1.3.6.1.4.1.1963.10.3.3.1.10.0
Options: An acceptable value for the TFTP timeout is any value from 200 to 25,000 ms.
Default: 500 ms