Intermec 502O, User Manual

Page: 34 / 402

5020 Data Collection PC User’s Manual nuggetf
code39
1-14
2. Press
to open the Start menu.
3. Press
! to select Programs, press 9 to select DCPC Demo, and press &. The DCPC
Demo screen appears.
4. Scan the following bar code by pushing the Scan button on the keypad or pulling
the trigger on the handle if the optional handle is installed. Direct the beam so that
it falls across all bars in the bar code label.
Test Bar Code
*12345*
*12345*
After the terminal successfully reads the label, you hear a high beep. When the bar
code label is scanned successfully, the LED is lit in a green color. The LED turns
off in less than 1 second unless you start scanning another label.
5. To check that the 5020 decoded the bar code correctly, make sure 12345 appears in
the Part Number field.
6. Press
3 to move to the Exit button and then press & to exit DCPC Demo.