manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Manual

Share
Download
Intel ITANIUM ARCHITECTURE Manual Download Page 63

4:56

Volume 4: Base IA-32 Instruction Reference

CALL—Call Procedure

 (Continued)

#SS(0)

If pushing the return address, parameters, or stack segment pointer 

onto the stack exceeds the bounds of the stack segment, when no 

stack switch occurs.
If a memory operand effective address is outside the SS segment 

limit.

#SS(selector)

If pushing the return address, parameters, or stack segment pointer 

onto the stack exceeds the bounds of the stack segment, when a 

stack switch occurs.
If the SS register is being loaded as part of a stack switch and the 

segment pointed to is marked not present.
If stack segment does not have room for the return address, 

parameters, or stack segment pointer, when stack switch occurs.

#NP(selector)

If a code segment, data segment, stack segment, call gate, task 

gate, or TSS is not present.

#TS(selector)

If the new stack segment selector and ESP are beyond the end of 

the TSS.
If the new stack segment selector is null.
If the RPL of the new stack segment selector in the TSS is not equal 

to the DPL of the code segment being accessed.
If DPL of the stack segment descriptor for the new stack segment is 

not equal to the DPL of the code segment descriptor.
If the new stack segment is not a writable data segment.
If segment-selector index for stack segment is outside descriptor 

table limits. 

#PF(fault-code)

If a page fault occurs.

#AC(0)

If an unaligned memory access occurs when the CPL is 3 and 

alignment checking is enabled.

Real Address Mode Exceptions

#GP

If a memory operand effective address is outside the CS, DS, ES, FS, 

or GS segment limit.
If the target offset is beyond the code segment limit.

Virtual 8086 Mode Exceptions

#GP(0)

If a memory operand effective address is outside the CS, DS, ES, FS, 

or GS segment limit.
If the target offset is beyond the code segment limit.

#PF(fault-code)

If a page fault occurs.

#AC(0)

If an unaligned memory access occurs when alignment checking is 

enabled.

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands