manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Manual

Share
Download
Intel ITANIUM ARCHITECTURE Manual Download Page 475

4:468

Volume 4: IA-32 SSE Instruction Reference

4.6.1.3

Compare Instructions

The CMPPS (Compare packed single-precision floating-point) instruction compares four 
pairs of packed single-precision floating-point numbers using the immediate operand as 
a predicate, returning per SP field an all “1” 32-bit mask or an all “0” 32-bit mask as a 
result. The instruction supports a full set of 12 conditions: equal, less than, less than 
equal, greater than, greater than or equal, unordered, not equal, not less than, not less 
than or equal, not greater than, not greater than or equal, ordered.

The CMPSS (Compare scalar single-precision floating-point) instruction compares the 
least significant pairs of packed single-precision floating-point numbers using the 
immediate operand as a predicate (same as CMPPS), returning per SP field an all “1” 
32-bit mask or an all “0” 32-bit mask as a result. 

The COMISS (Compare scalar single-precision floating-point ordered and set EFLAGS) 
instruction compares the least significant pairs of packed single-precision floating-point 
numbers and sets the ZF,PF,CF bits in the EFLAGS register (the OF, SF and AF bits are 
cleared).

The UCOMISS (Unordered compare scalar single-precision floating-point ordered and 
set EFLAGS) instruction compares the least significant pairs of packed single-precision 
floating-point numbers and sets the ZF,PF,CF bits in the EFLAGS register as described 
above (the OF, SF and AF bits are cleared). 

4.6.1.4

Shuffle Instructions

The SHUFPS (Shuffle packed single-precision floating-point) instruction is able to 
shuffle any of the packed four single-precision floating-point numbers from one source 
operand to the lower two destination fields; the upper two destination fields are 
generated from a shuffle of any of the four SP FP numbers from the second source 
operand (

Figure 4-5

). By using the same register for both sources, SHUFPS can return 

any combination of the four SP FP numbers from this register. 

The UNPCKHPS (Unpacked high packed single-precision floating-point) instruction 
performs an interleaved unpack of the high-order data elements of first and second 
packed single-precision floating-point operands. It ignores the lower half part of the 

Figure 4-5.

Packed Shuffle Operation

X4

X3

X2

X1

Y4

Y3

Y2

Y1

{Y4 ... Y1}

{Y4 ... Y1}

{X4 ... X1}

{X4 ... X1}

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands