manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Manual

Share
Download
Intel ITANIUM ARCHITECTURE Manual Download Page 131

4:124

Volume 4: Base IA-32 Instruction Reference

FDIVR/FDIVRP/FIDIVR—Reverse Divide

Description

Divides the source operand by the destination operand and stores the result in the 
destination location. The destination operand (divisor) is always in an FPU register; the 
source operand (dividend) can be a register or a memory location. Source operands in 
memory can be in single-real, double-real, word-integer, or short-integer formats.

These instructions perform the reverse operations of the FDIV, FDIVP, and FIDIV 
instructions. They are provided to support more efficient coding.

The no-operand version of the instruction divides the contents of the ST(0) register by 
the contents of the ST(1) register. The one-operand version divides the contents of a 
memory location (either a real or an integer value) by the contents of the ST(0) 
register. The two-operand version, divides the contents of the ST(

i

) register by the 

contents of the ST(0) register or vice versa.

The FDIVRP instructions perform the additional operation of popping the FPU register 
stack after storing the result. To pop the register stack, the processor marks the ST(0) 
register as empty and increments the stack pointer (TOP) by 1. The no-operand version 
of the floating-point divide instructions always results in the register stack being 
popped. In some assemblers, the mnemonic for this instruction is FDIVR rather than 
FDIVRP.

The FIDIVR instructions convert an integer source operand to extended-real format 
before performing the division.

If an unmasked divide by zero exception (#Z) is generated, no result is stored; if the 
exception is masked, an 

 of the appropriate sign is stored in the destination operand.

The following table shows the results obtained when dividing various classes of 
numbers, assuming that neither overflow nor underflow occurs.

Opcode

Instruction

Description

D8 /7

FDIVR 

m32real

Divide 

m32real

 by ST(0) and store result in ST(0)

DC /7

FDIVR 

m64real

Divide 

m64real

 by ST(0) and store result in ST(0)

D8 F8+i

FDIVR ST(0), ST(i)

Divide ST(

i

) by ST(0) and store result in ST(0)

DC F0+i

FDIVR ST(i), ST(0)

Divide ST(0) by ST(

i

) and store result in ST(

i

)

DE F0+i

FDIVRP ST(i), ST(0)

Divide ST(0) by ST(

i

), store result in ST(

i

), and pop the register 

stack

DE F1

FDIVRP

Divide ST(0) by ST(1), store result in ST(1), and pop the 
register stack

DA /7

FIDIVR 

m32int

Divide 

m32int

 by ST(0) and store result in ST(0)

DE /7

FIDIVR 

m16int

Divide 

m64int

 by ST(0) and store result in ST(0)

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands