manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Manual

Share
Download
Intel ITANIUM ARCHITECTURE Manual Download Page 315

4:308

Volume 4: Base IA-32 Instruction Reference

OUTS/OUTSB/OUTSW/OUTSD—Output String to Port

Description

Copies data from the second operand (source operand) to the I/O port specified with 
the first operand (destination operand). The source operand is a memory location at the 
address DS:ESI. (When the operand-size attribute is 16, the SI register is used as the 
source-index register.) The DS register may be overridden with a segment override 
prefix.

The destination operand must be the DX register, allowing I/O port addresses from 0 to 
65,535 to be accessed. When accessing an 8-bit I/O port, the opcode determines the 
port size; when accessing a 16- and 32-bit I/O port, the operand-size attribute 
determines the port size. 

The OUTSB, OUTSW and OUTSD mnemonics are synonyms of the byte, word, and 
doubleword versions of the OUTS instructions. (For the OUTS instruction, “DS:ESI” 
must be explicitly specified in the instruction.)

After the byte, word, or doubleword is transfer from the memory location to the I/O 
port, the ESI register is incremented or decremented automatically according to the 
setting of the DF flag in the EFLAGS register. (If the DF flag is 0, the ESI register is 
incremented; if the DF flag is 1, the EDI register is decremented.) The ESI register is 
incremented or decremented by 1 for byte operations, by 2 for word operations, or by 4 
for doubleword operations.

The OUTS, OUTSB, OUTSW, and OUTSD instructions can be preceded by the REP prefix 
for block input of ECX bytes, words, or doublewords. See 

“REP/REPE/REPZ/REPNE 

/REPNZ—Repeat String Operation Prefix” on page 4:337

 for a description of the REP 

prefix.

After an OUTS, OUTSB, OUTSW, or OUTSD instruction is executed, the processor waits 
for the acknowledgment of the OUT transaction before beginning to execute the next 
instruction. Note that the next instruction may be prefetched, even if the OUT 
transaction has not completed.

This instruction is only useful for accessing I/O ports located in the processor’s I/O 
address space. 

I/O transactions are performed after all prior data memory operations. No 
subsequent data memory operations can pass an I/O transaction.

Opcode

Instruction

Description

6E

OUTS DX, DS:(E)SI

Output byte at address DS:(E)SI to I/O port in DX

6F

OUTS DX, DS:SI

Output word at address DS:SI to I/O port in DX

6F

OUTS DX, DS:ESI

Output doubleword at address DS:ESI to I/O port in DX

6E

OUTSB

Output byte at address DS:(E)SI to I/O port in DX

6F

OUTSW

Output word at address DS:SI to I/O port in DX

6F

OUTSD

Output doubleword at address DS:ESI to I/O port in DX

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands