Intel ITANIUM ARCHITECTURE Manual Download Page 321

Page: 321 / 604

4:314

Volume 4: Base IA-32 Instruction Reference

POP—Pop a Value from the Stack

(Continued)

If the DS, ES, FS, or GS register is being loaded and the segment

pointed to is not a data or readable code segment.
If the DS, ES, FS, or GS register is being loaded and the segment

pointed to is a data or nonconforming code segment, but both the

RPL and the CPL are greater than the DPL.

#SS(0)

If the current top of stack is not within the stack segment.
If a memory operand effective address is outside the SS segment

limit.

#SS(selector)

If the SS register is being loaded and the segment pointed to is

marked not present.

#NP

If the DS, ES, FS, or GS register is being loaded and the segment

pointed to is marked not present.

#PF(fault-code)

If a page fault occurs.

#AC(0)

If an unaligned memory reference is made while the current

privilege level is 3 and alignment checking is enabled.

Real Address Mode Exceptions

#GP

If a memory operand effective address is outside the CS, DS, ES, FS,

or GS segment limit.

Virtual 8086 Mode Exceptions

#GP(0)

If a memory operand effective address is outside the CS, DS, ES, FS,

or GS segment limit.

#PF(fault-code)

If a page fault occurs.

#AC(0)

If an unaligned memory reference is made while alignment checking

is enabled.

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ITANIUM ARCHITECTURE

Reviews:

Related manuals for ITANIUM ARCHITECTURE

Brands by name

Popular brands

Intel ITANIUM ARCHITECTURE, Manual

Search results

Summary of Contents for ITANIUM ARCHITECTURE

Reviews:

Related manuals for ITANIUM ARCHITECTURE

Brands by name

Popular brands