Intel ITANIUM ARCHITECTURE Manual Download Page 317

Page: 317 / 604

4:310

Volume 4: Base IA-32 Instruction Reference

OUTS/OUTSB/OUTSW/OUTSD—Output String to Port

(Continued)

Flags Affected

None.

Additional Itanium System Environment Exceptions

Itanium Reg Faults NaT Register Consumption Abort.
Itanium Mem FaultsVHPT Data Fault, Nested TLB Fault, Data TLB Fault, Alternate Data

TLB Fault, Data Page Not Present Fault, Data NaT Page Consumption

Abort, Data Key Miss Fault, Data Key Permission Fault, Data Access

Rights Fault, Data Access Bit Fault, Data Dirty Bit Fault

IA_32_Exception

Debug traps for data breakpoints and single step

IA_32_Exception

Alignment faults

#GP(0)

Referenced Port is to an unimplemented virtual address or PSR.dt is

zero.

Protected Mode Exceptions

#GP(0)

If the CPL is greater than (has less privilege) the I/O privilege level

(IOPL) and any of the corresponding I/O permission bits in TSS for

the I/O port being accessed is 1

and when CFLG.io is 1

If the destination is located in a nonwritable segment.
If a memory operand effective address is outside the limit of the ES

segment.
If the ES register contains a null segment selector.
If an illegal memory operand effective address in the ES segments

is given.

#PF(fault-code)

If a page fault occurs.

#AC(0)

If alignment checking is enabled and an unaligned memory

reference is made while the current privilege level is 3.

Real Address Mode Exceptions

#GP

If a memory operand effective address is outside the CS, DS, ES, FS,

or GS segment limit.

#SS

If a memory operand effective address is outside the SS segment

limit.

Virtual 8086 Mode Exceptions

#GP(0)

If any of the I/O permission bits in the TSS for the I/O port being

accessed is 1.

#PF(fault-code)

If a page fault occurs.

#AC(0)

If alignment checking is enabled and an unaligned memory

reference is made.

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ITANIUM ARCHITECTURE

Reviews:

Related manuals for ITANIUM ARCHITECTURE

Brands by name

Popular brands

Intel ITANIUM ARCHITECTURE, Manual

Search results

Summary of Contents for ITANIUM ARCHITECTURE

Reviews:

Related manuals for ITANIUM ARCHITECTURE

Brands by name

Popular brands