manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Manual

Share
Download
Intel ITANIUM ARCHITECTURE Manual Download Page 122

Volume 4: Base IA-32 Instruction Reference

4:115

FCOMI/FCOMIP/

 

FUCOMI/FUCOMIP—Compare Real and Set EFLAGS

Description

Compares the contents of register ST(0) and ST(

i

) and sets the status flags ZF, PF, and 

CF in the EFLAGS register according to the results (see the table below). The sign of 
zero is ignored for comparisons, so that -0.0 = +0.0. 

The FCOMI/FCOMIP instructions perform the same operation as the FUCOMI/FUCOMIP 
instructions. The only difference is how they handle QNaN operands. The 
FCOMI/FCOMIP instructions set the status flags to “unordered” and generate an 
invalid-arithmetic-operand exception (#IA) when either or both of the operands is a 
NaN value (SNaN or QNaN) or is in an unsupported format. 

The FUCOMI/FUCOMIP instructions perform the same operation as the FCOMI/FCOMIP 
instructions, except that they do not generate an invalid-arithmetic-operand exception 
for QNaNs.

If invalid-operation exception is unmasked, the status flags are not set if the 
invalid-arithmetic-operand exception is generated.

The FCOMIP and FUCOMIP instructions also pop the register stack following the 
comparison operation. To pop the register stack, the processor marks the ST(0) register 
as empty and increments the stack pointer (TOP) by 1.

Opcode

Instruction

Description

DB F0+i

FCOMI ST, ST(

i

)

Compare ST(0) with ST(

i

) and set status flags accordingly

DF F0+i

FCOMIP ST, ST(

i

)

Compare ST(0) with ST(

i

), set status flags accordingly, and pop 

register stack

DB E8+i

FUCOMI ST, ST(

i

)

Compare ST(0) with ST(

i

), check for ordered values, and set 

status flags accordingly

DF E8+i

FUCOMIP ST, ST(

i

)

Compare ST(0) with ST(

i

), check for ordered values, set status 

flags accordingly, and pop register stack

Comparison Results

ZF

PF

CF

ST0 > ST(

i

)

0

0

0

ST0 < ST(

i

)

0

0

1

ST0 = ST(

i

)

1

0

0

Unordered

a

a.  Flags not set if unmasked invalid-arithmetic- operand 

(#IA) exception is generated.

1

1

1

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands