Intel ITANIUM ARCHITECTURE Manual Download Page 384

Page: 384 / 604

Volume 4: Base IA-32 Instruction Reference

4:377

STOS/STOSB/STOSW/STOSD—Store String Data

(Continued)

DEST



EAX;

THEN IF DF = 0

THEN EDI



ELSE EDI



-4;

FI;

Flags Affected

None.

Additional Itanium System Environment Exceptions

Itanium Reg Faults NaT Register Consumption Abort.
Itanium Mem FaultsVHPT Data Fault, Nested TLB Fault, Data TLB Fault, Alternate Data

TLB Fault, Data Page Not Present Fault, Data NaT Page Consumption

Abort, Data Key Miss Fault, Data Key Permission Fault, Data Access

Rights Fault, Data Access Bit Fault, Data Dirty Bit Fault

Protected Mode Exceptions

#GP(0)

If the destination is located in a nonwritable segment.
If a memory operand effective address is outside the limit of the ES

segment.
If the ES register contains a null segment selector.

#PF(fault-code)

If a page fault occurs.

#AC(0)

If alignment checking is enabled and an unaligned memory

reference is made while the current privilege level is 3.

Real Address Mode Exceptions

#GP

If a memory operand effective address is outside the CS, DS, ES, FS,

or GS segment limit.

#SS

If a memory operand effective address is outside the SS segment

limit.

Virtual 8086 Mode Exceptions

#GP(0)

If a memory operand effective address is outside the CS, DS, ES, FS,

or GS segment limit.

#SS(0)

If a memory operand effective address is outside the SS segment

limit.

#PF(fault-code)

If a page fault occurs.

#AC(0)

If alignment checking is enabled and an unaligned memory

reference is made.

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ITANIUM ARCHITECTURE

Reviews:

Intel ITANIUM ARCHITECTURE, Manual, Page: 384 / 604

Search results

Summary of Contents for ITANIUM ARCHITECTURE

Reviews: