manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Manual

Share
Download
Intel ITANIUM ARCHITECTURE Manual Download Page 46

Volume 4: Base IA-32 Instruction Reference

4:39

BSWAP—Byte Swap

Description

Reverses the byte order of a 32-bit (destination) register: bits 0 through 7 are swapped 
with bits 24 through 31, and bits 8 through 15 are swapped with bits 16 through 23. 
This instruction is provided for converting little-endian values to big-endian format and 
vice versa. 

To swap bytes in a word value (16-bit register), use the XCHG instruction. When the 
BSWAP instruction references a 16-bit register, the result is undefined.

Operation

TEMP 

 DEST

DEST(7..0) 

 TEMP(31..24)

DEST(15..8) 

 TEMP(23..16)

DEST(23..16) 

 TEMP(15..8)

DEST(31..24) 

 TEMP(7..0)

Flags Affected

None.

Additional Itanium System Environment Exceptions

Itanium Reg Faults NaT Register Consumption Abort.

Exceptions (All Operating Modes)

None.

Intel Architecture Compatibility Information

The BSWAP instruction is not supported on Intel architecture processors earlier than 
the Intel486™ processor family. For compatibility with this instruction, include 
functionally-equivalent code for execution on Intel processors earlier than the Intel486 
processor family.

Opcode

Instruction

Description

0F C8+

rd

BSWAP 

r32

Reverses the byte order of a 32-bit register.

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands