manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Manual

Share
Download
Intel ITANIUM ARCHITECTURE Manual Download Page 575

4:568

Volume 4: IA-32 SSE Instruction Reference

PMAXUB: Packed Unsigned Integer Byte Maximum

Operation:

mm1[7-0]   = (mm1[7-0] > mm2/m64[7-0]) ? mm1[7-0] : mm2/m64[7-0]; 

mm1[15-8]  = (mm1[15-8] > mm2/m64[15-8]) ? mm1[15-8] : mm2/m64[15-8];

mm1[23-16]  = (mm1[23-16] > mm2/m64[23-16]) ? mm1[23-16] : mm2/m64[23-16];

mm1[31-24]  = (mm1[31-24] > mm2/m64[31-24]) ? mm1[31-24] : mm2/m64[31-24];

mm1[39-32]  = (mm1[39-32] > mm2/m64[39-32]) ? mm1[39-32] : mm2/m64[39-32];

mm1[47-40]  = (mm1[47-40] > mm2/m64[47-40]) ? mm1[47-40] : mm2/m64[47-40];

mm1[55-48]  = (mm1[55-48] > mm2/m64[55-48]) ? mm1[55-48] : mm2/m64[55-48];

mm1[63-56]  = (mm1[63-56] > mm2/m64[63-56]) ? mm1[63-56] : mm2/m64[63-56];

Description:

The PMAXUB instruction returns the maximum between the eight unsigned words in 
MM1 and MM2/Mem.

Numeric Exceptions: 

 None.

Protected Mode Exceptions:

#GP(0) for an illegal memory operand effective address in the CS, DS, ES, FS or GS 
segments; #SS(0) for an illegal address in the SS segment; #PF (fault-code) for a page 
fault; #UD if CR0.EM = 1; #NM if TS bit in CR0 is set; #MF if there is a pending FPU 
exception #AC for unaligned memory reference. To enable #AC exceptions, three 
conditions must be true(CR0.AM is set; EFLAGS.AC is set; current CPL is 3).

Real Address Mode Exceptions:

Interrupt 13 if any part of the operand would lie outside of the effective address space 
from 0 to 0FFFFH;

 

#UD if CR0.EM = 1; #NM if TS bit in CR0 is set. #MF if there is a 

pending FPU exception.

Virtual 8086 Mode  Exceptions:

Same exceptions as in Real Address Mode; #PF(fault-code) for a page fault; #AC for 
unaligned memory reference if the current privilege level is 3.

Additional Itanium System Environment Exceptions

 Itanium Reg Faults Disabled FP Register Fault if PSR.dfl is 1, NaT Register 

Consumption Fault

 Itanium Mem Faults VHPT Data Fault, Data TLB Fault, Alternate Data TLB Fault, Data 

Page Not Present Fault, Data NaT Page Consumption Abort, Data 

Key Miss Fault, Data Key Permission Fault, Data Access Rights 

Fault, Data Access Bit Fault

Opcode

Instruction

Description

0F,DE, /r

PMAXUB mm1, mm2/m64

Return the maximum bytes between MM2/Mem and MM1.

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands