manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Manual

Share
Download
Intel ITANIUM ARCHITECTURE Manual Download Page 148

Volume 4: Base IA-32 Instruction Reference

4:141

FLDCW—Load Control Word

Description

Loads the 16-bit source operand into the FPU control word. The source operand is a 
memory location. This instruction is typically used to establish or change the FPU’s 
mode of operation.

If one or more exception flags are set in the FPU status word prior to loading a new FPU 
control word and the new control word unmasks one or more of those exceptions, a 
floating-point exception will be generated upon execution of the next floating-point 
instruction (except for the no-wait floating-point instructions. To avoid raising 
exceptions when changing FPU operating modes, clear any pending exceptions (using 
the FCLEX or FNCLEX instruction) before loading the new control word.

Operation

FPUControlWord 

 SRC;

FPU Flags Affected

C0, C1, C2, C3 undefined.

Floating-point Exceptions

None; however, this operation might unmask a pending exception in the FPU status 
word. That exception is then generated upon execution of the next waiting 
floating-point instruction.

Additional Itanium System Environment Exceptions

Itanium Reg Faults Disabled FP Register Fault if PSR.dfl is 1.
Itanium Mem FaultsVHPT Data Fault, Nested TLB Fault, Data TLB Fault, Alternate Data 

TLB Fault, Data Page Not Present Fault, Data NaT Page Consumption 

Abort, Data Key Miss Fault, Data Key Permission Fault, Data Access 

Rights Fault, Data Access Bit Fault, Data Dirty Bit Fault

Protected Mode Exceptions

#GP(0)

If a memory operand effective address is outside the CS, DS, ES, FS, 

or GS segment limit.
If the DS, ES, FS, or GS register is used to access memory and it 

contains a null segment selector.

#SS(0)

If a memory operand effective address is outside the SS segment 

limit.

#NM

EM or TS in CR0 is set.   

#PF(fault-code)

If a page fault occurs.

#AC(0)

If alignment checking is enabled and an unaligned memory 

reference is made while the current privilege level is 3.

Opcode

Instruction

Description

D9 /5

FLDCW m2byte

Load FPU control word from 

m2byte.

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands