manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Manual

Share
Download
Intel ITANIUM ARCHITECTURE Manual Download Page 370

Volume 4: Base IA-32 Instruction Reference

4:363

SHLD—Double Precision Shift Left

 (Continued)

DO

BIT[DEST, i] 

 BIT[SRC, i - COUNT + SIZE];

OD;

FI;

FI;

Flags Affected

If the count is 1 or greater, the CF flag is filled with the last bit shifted out of the 
destination operand and the SF, ZF, and PF flags are set according to the value of the 
result. For a 1-bit shift, the OF flag is set if a sign change occurred; otherwise, it is 
cleared. For shifts greater than 1 bit, the OF flag is undefined. If a shift occurs, the AF 
flag is undefined. If the count operand is 0, the flags are not affected. If the count is 
greater than the operand size, the flags are undefined.

Additional Itanium System Environment Exceptions

Itanium Reg Faults  NaT Register Consumption Abort.
Itanium Mem FaultsVHPT Data Fault, Nested TLB Fault, Data TLB Fault, Alternate Data 

TLB Fault, Data Page Not Present Fault, Data NaT Page Consumption 

Abort, Data Key Miss Fault, Data Key Permission Fault, Data Access 

Rights Fault, Data Access Bit Fault, Data Dirty Bit Fault

Protected Mode Exceptions

#GP(0)

If the destination is located in a nonwritable segment.
If a memory operand effective address is outside the CS, DS, ES, FS, 

or GS segment limit.
If the DS, ES, FS, or GS register contains a null segment selector.

#SS(0)

If a memory operand effective address is outside the SS segment 

limit.

#PF(fault-code)

If a page fault occurs.

#AC(0)

If alignment checking is enabled and an unaligned memory 

reference is made while the current privilege level is 3.

Real Address Mode Exceptions

#GP

If a memory operand effective address is outside the CS, DS, ES, FS, 

or GS segment limit.

#SS

If a memory operand effective address is outside the SS segment 

limit.

Virtual 8086 Mode Exceptions

#GP(0)

If a memory operand effective address is outside the CS, DS, ES, FS, 

or GS segment limit.

#SS(0)

If a memory operand effective address is outside the SS segment 

limit.

#PF(fault-code)

If a page fault occurs.

#AC(0)

If alignment checking is enabled and an unaligned memory 

reference is made.

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands