manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Manual

Share
Download
Intel ITANIUM ARCHITECTURE Manual Download Page 514

Volume 4: IA-32 SSE Instruction Reference

4:507

DIVPS: Packed Single-FP Divide

Operation:

xmm1[31-0]   = xmm1[31-0]   / (xmm2/m128[31-0]);

xmm1[63-32]  = xmm1[63-32]  / (xmm2/m128[63-32]);

xmm1[95-64]  = xmm1[95-64]  / (xmm2/m128[95-64]);

xmm1[127-96] = xmm1[127-96] / (xmm2/m128[127-96]);

Description:

The DIVPS instruction divides the packed SP FP numbers of both their operands.

FP Exceptions:

General protection exception if not aligned on 16-byte boundary, regardless of 
segment.

Numeric Exceptions: 

 Overflow, Underflow, Invalid, Divide by Zero, Precision, Denormal.

Protected Mode Exceptions:

#GP(0) for an illegal memory operand effective address in the CS, DS, ES, FS or GS 
segments; #SS(0) for an illegal address in the SS segment; #PF(fault-code) for a page 
fault; #UD if CR0.EM = 1; #NM if TS bit in CR0 is set; #XM for an unmasked SSE 
numeric exception (CR4.OSXMMEXCPT =1); #UD for an unmasked SSE numeric 
exception (CR4.OSXMMEXCPT =0); #UD if CRCR4.OSFXSR(bit 9) = 0; #UD if 
CPUID.XMM(EDX bit 25) = 0.

Real Address Mode Exceptions:

Interrupt 13 if any part of the operand would lie outside of the effective address space 
from 0 to 0FFFFH;

 

#UD if CR0.EM = 1; #NM if TS bit in CR0 is set; #XM for an 

unmasked SSE numeric exception (CR4.OSXMMEXCPT =1); #UD for an unmasked SSE 
numeric exception (CR4.OSXMMEXCPT =0); #UD if CRCR4.OSFXSR(bit 9) = 0; #UD if 
CPUID.XMM(EDX bit 25) = 0.

Virtual 8086 Mode  Exceptions:

Same exceptions as in Real Address Mode; #PF(fault-code) for a page fault.

Additional Itanium System Environment Exceptions

 Itanium Reg Faults Disabled FP Register Fault if PSR.dfl is 1, NaT Register 

Consumption Fault

 Itanium Mem Faults VHPT Data Fault, Data TLB Fault, Alternate Data TLB Fault, Data 

Page Not Present Fault, Data NaT Page Consumption Abort, Data 

Key Miss Fault, Data Key Permission Fault, Data Access Rights 

Fault, Data Access Bit Fault

Opcode

Instruction

Description

0F,5E,/r

DIVPS xmm1, xmm2/m128

Divide packed SP FP numbers in XMM1 by XMM2/Mem

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands