manualshive.com logo in svg

Intel 413808 I/O, Developer'S Manual

Share
Download
Intel 413808 I/O Developer'S Manual Download Page 485

Intel

®

 413808 and 413812 I/O Controllers in TPER Mode

October 2007

Developer’s Manual

Order Number: 317805-001US

485

System Controller (SC) and Internal Bus Bridge—Intel

®

 413808 and 413812

7.0

System Controller (SC) and Internal Bus Bridge

This chapter describes the System Controllers (SC) of the Intel

®

 413808 and 413812 

I/O Controllers  (4138xx). The System Controller controls the internal bus and its 

agents. There are two System Controllers on 4138xx since there are two internal 

busses.

7.1

Overview

The System Controller controls the internal bus agents arbitrating for the internal bus. 

The Internal Bus on 4138xx contains a separate address bus arbiter and data bus 

arbiter as the address and data busses are completely de-multiplexed. There are two 

internal busses on 4138xx and therefore there are two system controllers implemented 

— one for the North Internal Bus and one for the South Internal Bus. 

• The north internal bus SC controls the two Intel XScale

®

 processors, the DDR 

Memory Controller, the Bridge, and the SAS Interface.

• The south internal bus SC controls the ATU-E, ATU-X, the Bridge, the DDR SDRAM 

Memory Controller, the Application DMAs, the PBI, and the APB interface.

In addition to providing the address bus and data bus arbitration functionality, the SC 

also initiates address and data transactions once the bus has been granted. The SC is 

also the central hub which takes as inputs all the agents address and data busses, and 

then controlling how the address bus or data bus is routed to an agent.
The SC also provides hardware functionality that can be used to force address and data 

parity errors. This feature allows software to test error handling routines by forcing 

address or data parity error.

Summary of Contents for 413808 I/O

























































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands